A whole new gear for your mud motor.
Two-blade hardened stainless, electronically balanced, with a knife-sharp edge and a bright polished finish. Three pitches, so you can match the prop to your boat, your load and your elevation.
Pick the pitch for how you run
Elevation, hull length and load all change which Warrior works best. Here's how Glade matches them.
12.75 × 9
Best for boats at higher elevation, or larger boats with larger loads. A good balance of speed and low-end hole shot.
- Up to 55 hp at high elevation
- Up to 35 hp at low elevation or heavy loads
12.75 × 10
The mid-size. Good at low or high elevation, on 16 to 20 ft boats with light to moderate loads. A good combination of speed and low end.
- Runs on 35 to 55 hp
12.3 × 11
For low elevation and smaller boats: 16, 17, or a very light 18 ft.
- Needs more than 50 hp (modified engines) at low elevation to spin the 11 pitch efficiently
Still not sure? Answer 10 quick questions and get your best prop.
Take the Prop Selector
High performance built tough
The Warrior combines the Mud Buddy Big Blade with the strength of the 12.75" Hammer for a prop that holds up in heavy boats and rough terrain.
- Hardened Rockwell stainless steel alloy for longer blade life
- Electronically balanced for smooth running
- Bright chrome-like polished finish
- Fits all belt drive motors with a 3/4" hex shaft
- Made for 4,200–4,650 RPM, including level 1–3 performance and turbo kits
- Limited lifetime breakage warranty
Build your prop
Pick your pitch and motor, and check out in one step. Questions? Call or text 385-695-3807.
A Warrior fits a GTR XD two ways. Both work. Pick the one you prefer.
Questions
Which pitch should I run?
Go heavier and higher with the 9 pitch, middle of the road with the 10, and light, fast and low elevation with the 11. The Prop Selector asks about your boat and motor and gives you a best pick and a second choice.
I run a GTR XD. Machined or adaptor?
Both fit. Machined means the prop fits your XD shaft directly with no adaptor. The adaptor option is a standard hex prop plus our XD Prop Adaptor, which lets you run any 3/4" hex Mud Buddy or non-XD Gator Tail prop on your XD.
What motors does it fit?
All belt drive motors with a 3/4" hex shaft, including Mud Buddy and Gator Tail 2020 and older. GTR XD motors need the machined version or the XD Prop Adaptor.
Is there a warranty?
Yes. The Warrior is backed by a limited lifetime breakage warranty.
For a warranty claim, email glade@backwaterperformance.com with a picture of the issue, a description of the problem and your date of purchase.
Gear up before the next hunt.
Three Warrior pitches, built for Mud Buddy, Gator Tail and GTR XD.
Build My Prop